How to Perform Inspections?

Once the inspection schedule has been created, you can perform the inspection on the drone.  

1.  Navigate to Inspections  > Click Inspections in the row of the drone you wish to perform inspections.

The Drone Inspections page is displayed.

2.  Select the inspection from the Select Inspection dropdown list.

3.  Click Complete Inspection Task.

The Complete Inspections page is displayed.

4.  Select the name of the technician from the Technician dropdown list.

5.  Select the date of the inspection from the Inspection Date dropdown calendar.

6.  Check the box in the Inspected column against the components that have been inspected.

The Replaced, Status, and Notes columns are displayed against the components inspected. 

7.  Check the box in the Replaced column if the component has been replaced.

The New Serial Number field is displayed.

Note:  The * against the component in the Replaced column indicates that the component is overdue for being replaced.

8.  Select the status of inspection from the Status dropdown list.

9.  Enter the new serial number of the component replaced in the New Serial Number field.

Note:  When a serial number is added, the component is highlighted in blue.

10.  Click Save Inspection Task.

The inspection is saved.

Note:  The components that are inspected and replaced will automatically reset the inspection clock to zero.