How to Add Components to Inspection Schedule?

You can add components to the inspection schedule based on the requirement of your drone.  

1.  Navigate to Inspections > Click Inspections in the row of the drone you wish to add components to inspection schedule.

The Drone Inspections page is displayed.

2.  Click Configure Inspections. 

The Components & Inspections Configuration dialog is displayed.

3.  Click Add Component. 

The Set Component to Drone dialog is displayed. 

4.  Select the type of component from the Component Type dropdown list. 

5.  Enter a customized name for the component in the Custom Name field.

6.  Enter the serial number of the component in the Part Serial Number field. 

7.  Click Add. 

The component is added.

8.  Check the box against a component.

9.  Click the  icon.

The Component Inspection Details dialog is displayed. 

10.   Check the box Need to be replaced if replacement is needed.

11.  Enter any notes if needed in the Notes textbox.

12.  Click Update. 

The inspection component is updated and added to the inspection schedule.

Note:  In the Components & Inspections Configuration dialog, the  icon against the component indicates that the component must be inspected, whereas the  icon indicates that the component must be inspected and replaced.